新聞中心
滾動導軌的使用環境有什么要求嗎？
來源：http://www.306135.com/ 日期：2021-01-06 發布人：
當使用直線運動系統時,必須提供良好的潤滑。如果無潤滑狀態下使用,滾動部分就會更快地磨損,因而其使用壽命會縮短。
When using a linear motion system, good lubrication must be provided. If it is used without lubrication, the rolling part will wear faster, so its service life will be shortened.
潤滑劑具有如下功效∶
The lubricant has the following functions:
（1） 降低各運動部件之間的摩擦,從而可防止燒傷及減少磨損。
(1) Reduce the friction between the moving parts, so as to prevent burns and reduce wear.
（2） 在滾動面上形成油膜以減少作用于表面的應力，并延長滾動疲勞壽命。
(2) Oil film is formed on the rolling surface to reduce the surface stress and prolong the rolling fatigue life.
（3） 將油膜覆蓋于金屬表面以防止生銹。
(3) Cover the metal surface with oil film to prevent rust.
為充分發揮THK LM滾動導軌的功能,請根據使用條件進行潤滑。
In order to give full play to the function of THK LM rolling guide, please lubricate according to the service conditions.
安裝方式為水平使用以外的情況時潤滑劑可能會有難以輸送到滾動面上的情況。
When the installation mode is other than horizontal use, the lubricant may be difficult to transport to the rolling surface.
安裝方式以及油嘴配管接頭在LM滑塊上的安裝位置。
The installation method and the installation position of the nozzle fitting on the LM slider.
此外,即使是帶有密封墊片的LM滾動導軌,其內部的潤滑劑也會在運行中逐漸滲漏出去。
In addition, even the LM rolling guide with sealing gasket, the internal lubricant will gradually leak out during operation.
因此需要根據使用條件,以適當?shù)臅r間間隔來補給油脂。
Therefore, it is necessary to replenish the oil at appropriate intervals according to the use conditions.
導軌絲杠：從設計結構...<>
大型絲杠的性能設計介...<>
梯形絲杠和滾珠絲杠的...<>- 滾珠絲桿目前的行業的...<>
- 滾珠絲杠螺母油封更換...<>
相關：
