Ball screw has the characteristics of high precision and high efficiency. We should pay attention to details and maintenance of the ball screw during the operation of the ball screw, and then ensure the accuracy of the ball screw. How to ensure the accuracy of ball screw for a long time?

1.滾珠絲杠被廣泛的應用在精密定位的場合，所以滾珠絲杠的精確度是非常重要的，滾珠絲杠在長期運用后避免不了在作業中會發生的熱量然后可能會滾珠絲杠出現較大的摩擦力和定位誤差，所以為保證滾珠絲杠的正常運用，咱們應加強保養和維護作業。

1. Ball screw is widely used in precision positioning occasions, so the accuracy of ball screw is very important. Ball screw after long-term use can not avoid the heat that will occur in the operation, and then there may be greater friction and positioning error of ball screw. So in order to ensure the normal use of ball screw, we We should strengthen maintenance and maintenance operations.

2.為削減滾珠絲杠的磨損，咱們能夠將隔離滾珠和承載滾珠彼此替換，這樣在運行期間能夠在下降滾珠及其滾道之間摩擦力的一起還可保證滾珠絲杠的精確度。

2. In order to reduce the wear and tear of ball screw, we can replace isolation ball and bearing ball with each other, so that during operation, the friction between the ball and its raceway can be reduced together to ensure the accuracy of ball screw.

3.潤滑作業不到也會下降滾珠絲杠的精確度，在日常作業中應定時的運用的潤滑脂進行潤滑作業，削減因短少潤滑性然后減低精度，所以咱們需求做好潤滑作業。

3. The accuracy of ball screw will also be reduced if the lubrication operation is not enough. In daily operation, high quality grease should be used regularly to lubricate the ball screw, so we need to do a good job of lubrication.

許多設備的零件由于長期運轉而有了損壞，這樣就會影響工作效率。而關于一些高精準設備要求更嚴格，不然加工出來的產品都是不能用的。滾珠絲桿是設備中很重要的零件，出現了危害一定要進行批改或更滑。今天就來和我們介紹下滾珠絲桿軌跡損壞的幾種批改方法。

 

 

Many parts of equipment have been damaged due to long-term operation, which will affect work efficiency. The requirements for some high-precision equipment are more stringent, otherwise the products processed are useless. Ball screw is a very important part of equipment. If there is harm, it must be corrected or slippery. Today I'll introduce some methods to correct the track damage of ball screw.

 

一、滾道細微危害。將絲桿置于螺紋磨床兩間，找正后精磨，需要留意的是要操控好修磨量，這樣修出來的絲桿能不替換絲母，經過調隙康復其功用。

1. Fine harm of raceway. When the screw rod is placed between the two top points of the screw grinder and finely grinded after alignment, attention should be paid to controlling the grinding quantity, so that the screw rod repaired can not replace the screw mother and recover its function by adjusting the clearance.

二、滾道嚴峻危害。滾珠絲桿在螺紋磨床上磨削，修磨量依據危害程度斷定，并按附近直徑系列的鋼球標準進行精磨。

2. Serious harm of raceway. The ball screw is grinded on the thread grinder. The grinding quantity is determined according to the degree of hazard. The ball is grinded according to the standard of the steel ball of the nearby diameter series.

三、滾道部分危害。這種部分危害，主張我們可用金剛銼或油石，將危害的部位部分修整滑潤。

Part of the harm of raceway. This kind of partial hazard advocates that we can use diamond files or oil stones to repair and smooth the part of the hazard.

上述信息看完以后相信大家應該對導軌絲杠有了一定的了解，如果你想了解更多關于本行業的信息請持續關注我們的網站：http://www.306135.com！

After reading the above information, I believe you should have a certain understanding of the guide screw. If you want to know more about the industry, please continue to pay attention to our website: http://www.306135.com!