導軌作為機械運行的關鍵部件，長期暴露在潮濕、多塵或有化學介質的環境中，極易發生腐蝕，影響設備精度和使用壽命。合理的防腐蝕措施需結合使用環境與導軌材質，從材料優化、表面處理到日常維護，構建的防護體系。

　　As a key component of mechanical operation, guide rails are highly susceptible to corrosion when exposed to damp, dusty, or chemical media environments for a long time, which can affect equipment accuracy and service life. Reasonable anti-corrosion measures need to be combined with the usage environment and guide rail materials, from material optimization, surface treatment to daily maintenance, to build a comprehensive protection system.

　　材料選擇是防腐蝕的基礎。對于潮濕環境（如食品加工車間、戶外設備），優先選用耐腐蝕合金材質，如 304 不銹鋼導軌，其含鉻量達 18% 以上，能在表面形成致密氧化膜，抵御水和氧氣侵蝕，鹽霧測試中可保持 500 小時無銹蝕。在有酸堿腐蝕的場景（如化工設備），則需選用 316 不銹鋼，添加 2%-3% 的鉬元素，增強對氯離子的抵抗能力，適用于海邊或含鹽水霧環境。對于承重較大的導軌，可采用碳鋼基體表面滲鋁處理，滲鋁層厚度達 0.1-0.2 毫米，形成類似鋁合金的耐腐蝕表層，兼顧強度與耐腐蝕性。

　　Material selection is the foundation of corrosion prevention. For humid environments such as food processing workshops and outdoor equipment, corrosion-resistant alloy materials are preferred, such as 304 stainless steel guide rails, which have a chromium content of over 18% and can form a dense oxide film on the surface to resist water and oxygen erosion. They can maintain rust free for 500 hours in salt spray testing. In scenarios with acid and alkali corrosion (such as chemical equipment), 316 stainless steel should be selected, with 2% -3% molybdenum added to enhance resistance to chloride ions, suitable for coastal or salt water mist environments. For guide rails with large load-bearing capacity, carbon steel substrate surface aluminum infiltration treatment can be used, with an aluminum infiltration layer thickness of 0.1-0.2 millimeters, forming a corrosion-resistant surface layer similar to aluminum alloy, balancing strength and corrosion resistance.

　　表面處理技術能顯著提升抗腐蝕能力。電鍍工藝中，硬鉻鍍層（厚度 5-15 微米）是常用選擇，鍍層硬度達 800-1000HV，不僅耐磨，還能隔絕基體與腐蝕介質，適合機械加工設備的導軌。對于要求更高的場景，可采用化學鍍鎳磷合金，鍍層均勻無針孔，耐中性鹽霧性能超過 1000 小時，且與基體結合力強，不易脫落。噴涂處理則適用于大型導軌，通過靜電噴涂氟碳涂料（厚度 30-50 微米），利用氟樹脂的化學惰性，抵御酸堿和有機溶劑侵蝕，同時具備良好的耐候性，戶外使用可保持 10 年以上不褪色、不粉化。

　　Surface treatment technology can significantly enhance corrosion resistance. In the electroplating process, hard chromium coating (thickness 5-15 microns) is a commonly used choice, with a hardness of 800-1000HV. It is not only wear-resistant, but also can isolate the substrate from corrosive media, making it suitable for the guide rails of mechanical processing equipment. For scenarios with higher requirements, chemical nickel phosphorus alloy can be used, with a uniform and pinhole free coating, a neutral salt spray resistance of over 1000 hours, and strong adhesion to the substrate, making it difficult to peel off. Spray treatment is suitable for large guide rails, using electrostatic spraying of fluorocarbon coating (thickness 30-50 microns), utilizing the chemical inertness of fluororesin to resist acid, alkali, and organic solvent erosion, while also having good weather resistance. It can be used outdoors for more than 10 years without fading or powdering.

　　密封與隔離設計阻斷腐蝕介質接觸。在導軌與外界環境間加裝防護罩，如伸縮式風琴防護罩，采用耐油橡膠布或尼龍布制成，能隨導軌運動伸縮，防止粉塵、水汽進入。對于液體飛濺環境（如機床冷卻系統），可在導軌側面安裝橡膠密封條，密封條與導軌面緊密貼合，壓縮量控制在 2-3 毫米，既不影響運動精度，又能阻擋冷卻液滲入。在濕度較高的場所，還可在導軌安裝腔體內放置干燥劑（如硅膠干燥劑，每立方米空間放置 50-100 克），降低局部空氣濕度，避免冷凝水形成。

　　Sealing and isolation design blocks contact with corrosive media. Install a protective cover between the guide rail and the external environment, such as a retractable accordion protective cover made of oil resistant rubber cloth or nylon cloth, which can expand and contract with the movement of the guide rail to prevent dust and water vapor from entering. For liquid splashing environments (such as machine tool cooling systems), rubber sealing strips can be installed on the side of the guide rail. The sealing strips are tightly attached to the guide rail surface, and the compression amount is controlled at 2-3 millimeters, which does not affect the motion accuracy and can block the infiltration of coolant. In places with high humidity, desiccants (such as silica gel desiccants, with 50-100 grams per cubic meter of space) can be placed inside the guide rail installation chamber to reduce local air humidity and avoid condensation.

　　電化學保護適用于特定場景的長效防護。對于埋地或浸入液體中的導軌（如水利設備導軌），可采用犧牲陽極法，在導軌附近連接鋅塊或鎂塊，利用鋅、鎂的活性高于鐵的特性，優先發生氧化反應，保護導軌基體不被腐蝕，陽極塊每 1-2 年更換一次，根據腐蝕速率調整更換周期。外加電流陰極保護則適用于大型設備，通過直流電源使導軌成為陰極，抑制其電化學腐蝕，電流密度控制在 0.1-0.5 毫安 / 平方厘米，需定期檢測電極狀態，確保保護效果穩定。

　　Electrochemical protection is suitable for long-term protection in specific scenarios. For guide rails buried underground or immersed in liquids (such as water conservancy equipment guide rails), sacrificial anode method can be used to connect zinc or magnesium blocks near the guide rails. By utilizing the higher activity of zinc and magnesium than iron, oxidation reaction occurs first to protect the guide rail substrate from corrosion. The anode block is replaced every 1-2 years, and the replacement cycle is adjusted according to the corrosion rate. External current cathodic protection is suitable for large equipment, which uses a DC power supply to turn the guide rail into a cathode and suppress its electrochemical corrosion. The current density is controlled at 0.1-0.5 milliampere per square centimeter, and the electrode status needs to be regularly checked to ensure stable protection effect.

　　日常維護是防腐蝕的重要補充。定期清理導軌表面的油污、粉塵，用中性清潔劑（如肥皂水）擦拭，避免使用強酸強堿清洗劑，防止破壞表面防護層。清理后涂抹專用防銹油（如鋰基防銹脂），油膜厚度保持 5-10 微米，形成潤滑與防護雙重作用，每月少涂抹一次，潮濕環境需增加頻次。對于長期停用的導軌，需進行徹底清潔后，用防銹紙包裹或涂覆可剝性塑料，塑料膜厚度 0.2-0.3 毫米，形成密封保護層，防止存放期間銹蝕。

　　Daily maintenance is an important supplement to corrosion prevention. Regularly clean the oil and dust on the surface of the guide rail, wipe it with a neutral cleaning agent (such as soapy water), avoid using strong acid and alkali cleaning agents, and prevent damage to the surface protective layer. After cleaning, apply specialized anti rust oil (such as lithium based anti rust grease) with a film thickness of 5-10 microns, forming a dual function of lubrication and protection. Apply at least once a month, and increase the frequency in humid environments. For guide rails that have been out of use for a long time, they need to be thoroughly cleaned and wrapped or coated with rust proof paper or peelable plastic with a plastic film thickness of 0.2-0.3 millimeters to form a sealed protective layer to prevent rusting during storage.

　　本文由導軌絲杠友情奉獻.更多有關的知識請點擊:http://www.306135.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the guide screw For more information, please click: http://www.306135.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.