新聞中心
直線導軌也是大家常說的線性導軌,那樣的機械設備應用構
來源:http://www.306135.com/ 日期:2020-12-09 發布人:
直線導軌也是大家常說的線性導軌,那樣的機械設備應用構件歸屬于精細的零件,因而,在應用的情況下,稍不留神,會導致零件的毀壞,在生產制造實際操作的情況下,一定要采用較為慎重的生產制造心態,避免出現由于應用有誤而導致線性導軌的毀壞的狀況。
Linear guide rail is also commonly referred to as linear guide rail. Such mechanical equipment application components belong to fine parts. Therefore, in the case of application, a little carelessness will lead to the destruction of parts. In the actual operation of production and manufacturing, we must adopt a more cautious production and manufacturing mentality to avoid the damage of linear guide rail due to application errors.
1、應用規定
1. Application regulations
針對應用的自然環境直線導軌也擁有較為高的應用規定,在大家生產制造的自然環境中,不但有看得清的塵土,還存有一些看不到的塵土,這種塵土一旦掉入到線性導軌中,會出現一些欠佳的應用反映,例如提升滑軌的磨壞度,使機械設備的震動能量增加,還有便是噪聲聲提升等,進而會引發出別的的應用的難題。
For the application of natural environment, linear guide rail also has higher application requirements. In the natural environment of production and manufacturing, there are not only visible dust, but also some invisible dust. Once this dust falls into the linear guide rail, there will be some poor application reflection, such as improving the wear degree of slide rail, increasing the vibration energy of mechanical equipment, and convenient It will lead to other application problems.


2、安裝事宜
2. Installation matters
針對線性導軌的安裝,也必須仔細認真,在安裝的情況下,不能出現力開展沖壓模具的狀況,也不能應用吊物對滑軌開展安裝和敲打,一旦出現安裝不善的狀況,要采用技術性上的個人行為開展安裝。
For the installation of linear guide rail, it is also necessary to be careful. In the case of installation, it is not allowed to carry out the stamping die with super strength, nor can the hanging object be used to install and knock the slide rail. In case of improper installation, technical personal behavior shall be adopted for installation.
3、要避免出現生銹的狀況
3. Rust should be avoided
要避免出現那樣的應用狀況,防止立即的應用兩手取拿那樣的零配件,而恰當的作法便是應用前把自己的兩手清理整潔,除去污垢和汗水,還有便是能夠再直線導軌上擦抹好一些礦物質植物油脂,隨后在開展別的層面的實際操作。尤其是來到濕冷的夏天,一定要搞好防水解決。
To avoid such application situation, first of all, prevent the immediate application of two hands to take such parts, and the proper way is to clean up your hands before application, remove dirt and sweat, and then wipe some mineral vegetable grease on the linear guide rail, and then carry out other practical operation. Especially come to the wet and cold summer, we must do a good job in waterproof solution.
- 上一篇:導軌絲杠的精度檢測步驟
- 下一篇:滾珠絲杠異響是因為什么原因?
導軌絲杠:從設計結構...<>
大型絲杠的性能設計介...<>
梯形絲杠和滾珠絲杠的...<>
滾珠絲桿目前的行業的...<>
滾珠絲杠螺母油封更換...<>
相關:


